build parallella-linux kernel
Posted: Wed Aug 20, 2014 9:11 am
Hi all,
I'm essentially trying to build a headless 7020 kernel that has CIFS support. upon building using the git clone of parallella-linux I get at serial console:
---------------------------------------------
Error: unrecognized/unsupported device tree compatible list:
[ 'xlnx,zynq-7000' ]
Available machine support:
ID (hex) NAME
00000d32 Xilinx Zynq Platform
----------------------------------------------
The build was done with
make ARCH=arm CROSS_COMPILE=... mrproper
make ARCH=arm CROSS_COMPILE=... xilinx_zynq_defconfig
... enable cifs support
make ARCH=arm CROSS_COMPILE=... uImage
I am assuming that the newer gen1 7020 does not need the dts patch at
http://ftp.parallella.org/ubuntu/archiv ... /gitpatch/
and booting using u-boot on the SPI flash.
Maybe I'm missing something obvious. Any help is appreciated.
Thanks,
Claudiu
I'm essentially trying to build a headless 7020 kernel that has CIFS support. upon building using the git clone of parallella-linux I get at serial console:
---------------------------------------------
Error: unrecognized/unsupported device tree compatible list:
[ 'xlnx,zynq-7000' ]
Available machine support:
ID (hex) NAME
00000d32 Xilinx Zynq Platform
----------------------------------------------
The build was done with
make ARCH=arm CROSS_COMPILE=... mrproper
make ARCH=arm CROSS_COMPILE=... xilinx_zynq_defconfig
... enable cifs support
make ARCH=arm CROSS_COMPILE=... uImage
I am assuming that the newer gen1 7020 does not need the dts patch at
http://ftp.parallella.org/ubuntu/archiv ... /gitpatch/
and booting using u-boot on the SPI flash.
Maybe I'm missing something obvious. Any help is appreciated.
Thanks,
Claudiu