Parallella Community

When I try to use disk imager on y 16Gb SDC card it tells me there isn't enough room. Any idea why that is, and how to get round it? I bought the card brand new for the project.

Same problem as above.

Tried on Windows 7 using Disk Imager. This I have used this many times to burn images for different boards.

I am now burning the image using Linux: sudo dd if=image.img of=/dev/sdX bs=4M

Will report back in a few hours, hopefully it writes without error and the board boots

Out of space using Linux DD to write the image. I thought it could have been a Windows issue.

Any ideas?

I tried both zips at ftp://ftp.parallella.org/parallella/gen1/