by theover » Fri Mar 07, 2014 8:05 pm
I used ffmpeg to concat-recompress my video, which had been split in the camera of the brand Sony, and used that filename for the 720p transcoding which I uploaded to youtube, so that's where the name of the vid comes from, it means not too much.
Thanks for calling my projects cool, the reason for the wires is that the enclosures were prepared to house a big amount of analog channels, at least dozens, and I wanted to be able to drive each volume control chip with it's own control wire, so they all can be updated during the same zero crossing (of the analog signals), without the few MHz control signals having to be daisy chained, in the FPGA there's a small circuit I made which drives the SDI (or what are they called again ?) bus signals, and which could also be programmed to do it's own cross-face computations, and fitting one of such circuits for each channel in the Spartan shown isn't a space problem, and allows the whole (future... (this project started years ago!)) mixer to update it's sliders very quick and synchonously!
I'm univ. EE, so of course a lot of wires don't frighten me..
T.V.